RCBS X-Die Full Length Sizer Die 6.5 Creedmoor
$57.25
Elevate your reloading process with the RCBS X-Die Full Length Sizer Die 6.5 Creedmoor, eliminating the need for repeated trimming with its patented design and expander ball. Compatible with 6.5 Creedmoor caliber cases, this die standardizes dimensions with a single initial trim.
1 in stock
Trim a bottleneck case once and never trim again with the X Die Full Length Sizer. Its specially designed mandrel has an expander ball and decapping pin attached. The patented design eliminates the need for repeated trimming after an initial trim of .020 inch off the maximum length to standardize the case. The X Die doesn't shorten the length of the case: The mandrel reduces the growth caused by the case mouth contacting the mandrel during sizing. Because of an extremely close tolerance between the mandrel and die neck wall the neck wall of the case does not thicken as the case length is pushed back. Cases repeatedly sized in the X-Die will initially grow a few thousandths of an inch and then stabilize below the maximum case length with no discernable loss of accuracy or case life.
Note: Those who are just starting to reload a given caliber should order the X Die Full Length Set containing the X Die Sizer and Standard Seater Die.
- Mandrel has an expander ball and decapping pin attached
- Initial trim of .020 inch off maximum length standardizes case
- Mandrel reduces the growth caused by the case mouth contacting the mandrel during sizing
- Neck wall of the case does not thicken as the case length is pushed back
- Made in USA
| Weight | 0.130 lbs |
|---|---|
| Dimensions | 6.000 × 4.500 × 1.700 in |
| Manufacturer | RCBS |
PROCESSING & SHIPPING
Orders typically ship within 1–3 business days (Monday–Friday) after payment and all required documentation are received. Time to arrival after shipment depends on the carrier. Shipping method is at BT Gun Company’s discretion; ammunition and oversized accessories are charged at actual shipping cost. We do not ship to Hawaii or Alaska.
FIREARM TRANSFERS
- Firearms must ship to a licensed FFL dealer of your choosing — confirm with them first that they can accept the transfer.
- Your receiving FFL will need to email their license to [email protected] before we can ship.
- Inspect your firearm at your FFL’s location before signing ATF Form 4473 — once signed, the firearm is considered accepted.
You’re responsible for knowing the firearms laws in your state before ordering. For complete shipping, returns, and restocking-fee policy details, see our Shipping & Returns page.
Reviews
Clear filtersThere are no reviews yet.